Alfen · OCPP 1.6J
Not hardware-validated by 22togo Last verified 2026-11-12Alfen Eve Single Pro-line
Connect an Alfen Eve Single Pro-line 22 kW three-phase charger to 22togo over OCPP 1.6J.
The Eve Single Pro-line uses the same Alfen web interface (or touchscreen). Configure the CSMS URL, Charge Point Identity, and Back office authorization Key with Security Profile 2, then restart and verify.
Before you start
- A 22togo station record with its exact identity (Charge Point ID) and OCPP auth token.
- The OCPP server URL shown in the 22togo app for that station (including identity path).
- The charger installed, powered, and connected to the local network (Ethernet).
- A computer with web browser on the same network, or the ALFEN Config Tool.
Settings to enter
Use these values when configuring the charger's OCPP backend.
| Setting | Value | Notes |
|---|---|---|
| Protocol | OCPP 1.6J |
Select OCPP 1.6 JSON. |
| CSMS URL | wss://<ocpp-host>/<identity> |
Use the exact URL from the 22togo app. Must include the identity path segment. |
| Charge Point Identity | <identity> |
Must match the 22togo station identity exactly. |
| Authorization Key | <ocpp_auth_token> |
Enter the per-station auth token from 22togo in the 'Back office authorization Key' field. |
| Security Profile | 2 - TLS with Basic Authentication |
Select Security Profile 2 for wss:// connections with Basic Auth. |
| Network | Ethernet (DHCP or Static) |
Alfen Eve chargers use wired Ethernet. Configure IPv4 before OCPP. |
Setup steps
Follow the steps in order. Restart the charger after changing backend settings.
-
1
Access the Alfen web interface
- Connect your computer to the same Ethernet network as the charger.
- Find the charger’s IP address (default: DHCP, check router or use ALFEN Config Tool).
- Open browser to
http://<charger-ip>. 4. Log in with installer credentials (default: usernameinstaller, passwordalfenor on label).
Alfen Eve chargers do not have Wi-Fi — they use wired Ethernet only. The ALFEN Config Tool (Windows) can also discover and configure the charger via USB or network.
-
2
Configure network settings
- Go to Connectivity → General → Network Profile 1.
- Set IPv4 Configuration to DHCP (or Static IP with your network details). 3. Apply and verify the charger has internet access.
If using Static IP, ensure DNS and gateway are correct for internet access.
-
3
Configure OCPP backend
- Go to Connectivity → General → Network Profile 1.
- In CSMS URL, enter the full 22togo WebSocket URL including identity path (e.g.,
wss://ocpp.22togo.com/CHG-001). - Set Security Profile to 2 - TLS with Basic Authentication.
- In Back office authorization Key, enter the OCPP auth token from 22togo.
- In Charge Point Identity, enter the exact station identity from 22togo. 6. Click Save.
The ‘Back office authorization Key’ field is the OCPP auth token. Security Profile 2 enables Basic Auth over wss://.
-
4
Restart and verify
- Reboot the charger (power cycle or via System → Reboot).
- After reboot, check Status → OCPP — should show ‘Connected’ with OCPP 1.
-
- In 22togo app, station should show ‘Online’.
If connection fails, verify CSMS URL (including identity path), identity, and auth token. Check OCPP log in the web interface.
Charger capabilities
What this model supports with 22togo over OCPP.
-
OCPP 1.6J
-
Ethernet only
Wired Ethernet only; no Wi-Fi or 4G on Eve Single models.
-
Web & Config Tool commissioning
-
Authorization Key (Basic Auth)
-
Smart charging profiles
-
MID meter support
Frequently asked questions
What extra features does the Pro-line have?
The Pro-line includes a color touchscreen display for local configuration and status, plus additional connectivity options. OCPP setup is the same as the S-line.
Can I configure OCPP via the touchscreen?
Yes. The touchscreen provides access to the same Connectivity settings as the web interface. You can enter the CSMS URL, identity, and auth token directly on the charger.
Does the Pro-line support load balancing?
Yes. With an external CT clamp (configured under External Devices) and OCPP smart charging, the Pro-line supports dynamic load balancing.
Sources
These steps are based on public vendor documentation.