myenergi · OCPP 1.6J
Not hardware-validated by 22togo Last verified 2026-11-12myenergi Zappi v2.1
Connect a myenergi Zappi v2.1 22 kW three-phase charger to 22togo over OCPP 1.6J.
The myenergi Zappi v2.1 is configured via the web interface. Enable OCPP in Settings → OCPP, enter the OCPP Server (with identity path), Charge Point ID, and OCPP AuthPass (22togo token, sent as Basic Auth password).
Before you start
- A 22togo station record with its exact identity (Charge Point ID) and OCPP auth token.
- The OCPP server URL shown in the 22togo app for that station (including identity path).
- The charger installed, powered, and connected to the local network (Ethernet or Wi-Fi).
- A computer/phone with web browser on the same network.
Settings to enter
Use these values when configuring the charger's OCPP backend.
| Setting | Value | Notes |
|---|---|---|
| OCPP Server | wss://<ocpp-host>/<identity> |
Use the exact URL from the 22togo app. Must include the identity path segment. |
| Charge Point ID | <identity> |
Must match the 22togo station identity exactly. |
| OCPP AuthPass | <ocpp_auth_token> |
Enter the per-station auth token from 22togo. myenergi uses 'OCPP AuthPass' (HTTP Basic Auth password). |
| OCPP Version | OCPP 1.6J |
Select OCPP 1.6-J. |
| Network | Ethernet or Wi-Fi |
Configure Ethernet (DHCP) or Wi-Fi via the myenergi app before OCPP. |
Setup steps
Follow the steps in order. Restart the charger after changing backend settings.
-
1
Access the Zappi web interface
- Connect your device to the same network as the charger.
- Open a browser to
http://zappi.local(or the charger’s IP address). 3. Log in with the admin PIN (default:1234or set via app).
The Zappi uses mDNS hostname
zappi.local. If that doesn’t resolve, find the IP in your router’s DHCP list. -
2
Configure network connection
- Go to Settings → Network.
- For Ethernet: DHCP is automatic; plug in cable.
- For Wi-Fi: select SSID, enter password, save. 4. Verify internet connectivity.
The myenergi app can configure Wi-Fi during initial setup. Ethernet is recommended for stable OCPP.
-
3
Configure OCPP settings
- Go to Settings → OCPP.
- Enable OCPP.
- Set OCPP Version to OCPP 1.6-J.
- In OCPP Server, enter the full 22togo WebSocket URL including identity path (e.g.,
wss://ocpp.22togo.com/CHG-001). - In Charge Point ID, enter the exact station identity from 22togo.
- In OCPP AuthPass, enter the OCPP auth token from 22togo. 7. Click Save.
myenergi uses ‘OCPP AuthPass’ for the authorization token (sent as HTTP Basic Auth password). The username is the Charge Point ID.
-
4
Restart and verify
- After saving, the Zappi will restart automatically.
- Log back in and check Status → OCPP — should show ‘Connected’ with OCPP 1.
-
- In 22togo app, station should show ‘Online’.
If connection fails, verify server URL (includes identity path), Charge Point ID, and OCPP AuthPass. Check the OCPP log in the web interface.
Charger capabilities
What this model supports with 22togo over OCPP.
-
OCPP 1.6J
-
Web interface commissioning
-
Ethernet & Wi-Fi
-
OCPP AuthPass support
-
Smart charging profiles
-
PV surplus / Eco modes
Zappi's Eco/Eco+/Fast modes work alongside OCPP smart charging.
Frequently asked questions
Does Zappi v2.1 support OCPP 1.6J?
Yes. Zappi v2.1 supports OCPP 1.6J via the web interface (Settings → OCPP).
What are Zappi's Eco modes?
Eco: charges only with surplus PV. Eco+: charges with surplus PV + grid top-up if needed. Fast: charges at max speed regardless of PV. These work alongside OCPP.
Can Zappi do three-phase load balancing?
Yes. With the myenergi harvi CT clamp, three-phase dynamic load balancing works via OCPP.
Sources
These steps are based on public vendor documentation.