Ohme · OCPP 1.6J
Not hardware-validated by 22togo Last verified 2026-11-12Ohme ePod
Connect an Ohme ePod 7.4 kW single-phase charger to 22togo over OCPP 1.6J.
The Ohme ePod is configured via the Ohme app. Enable OCPP in Settings → OCPP, enter the OCPP Server URL (with identity path), Charge Point Identity, and OCPP Password (22togo token).
Before you start
- A 22togo station record with its exact identity (Charge Point ID) and OCPP auth token.
- The OCPP server URL shown in the 22togo app for that station (including identity path).
- The charger installed, powered, and connected to the internet (Wi-Fi or Ethernet).
- The Ohme app (iOS/Android) with access to the charger.
Settings to enter
Use these values when configuring the charger's OCPP backend.
| Setting | Value | Notes |
|---|---|---|
| OCPP Server URL | wss://<ocpp-host>/<identity> |
Use the exact URL from the 22togo app. Must include the identity path segment. |
| Charge Point Identity | <identity> |
Must match the 22togo station identity exactly. |
| OCPP Password | <ocpp_auth_token> |
Enter the per-station auth token from 22togo. Ohme calls this 'OCPP Password'. |
| OCPP Version | OCPP 1.6J |
Select OCPP 1.6J. |
| Network | Wi-Fi or Ethernet |
Configure Wi-Fi (via app) or Ethernet before enabling OCPP. |
Setup steps
Follow the steps in order. Restart the charger after changing backend settings.
-
1
Connect charger to internet via Ohme app
- Open the Ohme app and add your charger.
- Go to Settings → Network.
- For Wi-Fi: select SSID, enter password, connect.
- For Ethernet: plug in cable; DHCP is automatic. 5. Verify the app shows ‘Connected’.
Ohme chargers must be online in the Ohme app before OCPP can be configured.
-
2
Enable OCPP in the Ohme app
- In the app, go to Settings → OCPP.
- Toggle OCPP Enabled to ON.
- Set OCPP Version to OCPP 1.6J.
- In OCPP Server URL, enter the full 22togo WebSocket URL including identity path (e.g.,
wss://ocpp.22togo.com/CHG-001). - In Charge Point Identity, enter the exact station identity from 22togo.
- In OCPP Password, enter the OCPP auth token from 22togo. 7. Tap Save.
Ohme uses ‘OCPP Password’ for the authorization token. The charger may restart after saving.
-
3
Verify connection
- After saving, the charger will reconnect.
- In the app, check Status → OCPP — should show ‘Connected’ with OCPP 1.
-
- In 22togo app, station should show ‘Online’.
If connection fails, verify server URL (includes identity path), Charge Point Identity, and OCPP Password. Check app logs for errors.
Charger capabilities
What this model supports with 22togo over OCPP.
-
OCPP 1.6J
-
App-based commissioning
-
Wi-Fi & Ethernet
-
OCPP Password support
-
Smart charging profiles
-
Solar/price-aware charging
Ohme's native solar and price-aware charging works alongside OCPP.
Frequently asked questions
What's the difference between Home Pro and ePod?
The ePod is a more compact, budget-friendly version. Both are 7.4 kW single-phase. OCPP setup is identical.
Does ePod have Ethernet?
The ePod typically uses Wi-Fi only. Check your specific model for Ethernet support.
Is ePod compatible with Ohme's solar charging?
Yes. The ePod supports Ohme's solar-aware charging (with compatible inverter data) alongside OCPP.
Sources
These steps are based on public vendor documentation.