Easee · OCPP 1.6J
Not hardware-validated by 22togo Last verified 2026-11-12Easee Charge
Connect an Easee Charge 22 kW three-phase charger to 22togo over OCPP 1.6J.
The Easee Charge is configured via the Easee Portal. Enable OCPP in Settings → OCPP, enter the OCPP Server URL (with identity path), Charge Point ID, and OCPP Auth Key (22togo token).
Before you start
- A 22togo station record with its exact identity (Charge Point ID) and OCPP auth token.
- The OCPP server URL shown in the 22togo app for that station (including identity path).
- The charger installed, powered, and connected to the internet (Ethernet, Wi-Fi, or 4G).
- An Easee account with access to the site in the Easee Portal.
Settings to enter
Use these values when configuring the charger's OCPP backend.
| Setting | Value | Notes |
|---|---|---|
| OCPP Server URL | wss://<ocpp-host>/<identity> |
Use the exact URL from the 22togo app. Must include the identity path segment. |
| Charge Point ID | <identity> |
Must match the 22togo station identity exactly. Easee uses the charger serial by default. |
| OCPP Auth Key | <ocpp_auth_token> |
Enter the per-station auth token from 22togo in the 'OCPP Auth Key' field. |
| OCPP Version | OCPP 1.6J |
Select OCPP 1.6J. |
| Network | Ethernet, Wi-Fi, or 4G |
Configure network first (charger must be online in Easee Portal). |
Setup steps
Follow the steps in order. Restart the charger after changing backend settings.
-
1
Ensure charger is online in Easee Portal
- Log in to portal.easee.com.
- Navigate to your site and charger. 3. Verify the charger shows ‘Online’ (green status). If offline, check network (Ethernet, Wi-Fi, or 4G via the Easee app).
Easee chargers connect to the Easee cloud first. The portal manages Wi-Fi/4G configuration.
-
2
Configure OCPP settings
- In the Easee Portal, select the charger.
- Go to Settings → OCPP.
- Enable OCPP toggle.
- Set OCPP Version to 1.6J.
- In OCPP Server URL, enter the full 22togo WebSocket URL including identity path (e.g.,
wss://ocpp.22togo.com/CHG-001). - In Charge Point ID, enter the exact station identity from 22togo (or leave blank to use serial).
- In OCPP Auth Key, enter the OCPP auth token from 22togo. 8. Click Save.
The ‘OCPP Auth Key’ field is the per-station token from 22togo. The charger serial is used as identity by default; only override if your 22togo identity differs.
-
3
Restart and verify
- After saving, the charger will reconnect to the OCPP backend.
- In the portal, check Status → OCPP — should show ‘Connected’ with OCPP 1.
-
- In 22togo app, station should show ‘Online’.
If connection fails, verify server URL (includes identity path), auth key, and network. Check Easee Portal logs for error details.
Charger capabilities
What this model supports with 22togo over OCPP.
-
OCPP 1.6J
-
Portal-based commissioning
-
Ethernet, Wi-Fi, 4G
-
OCPP Auth Key support
-
Smart charging profiles
-
Dynamic load balancing
Easee's circuit-level load balancing works alongside OCPP.
Frequently asked questions
What's the difference between Easee Home and Charge?
Easee Charge is designed for higher utilization (shared/commercial parking) with a more robust enclosure and additional safety features. OCPP setup is identical.
Does Easee Charge support load balancing?
Yes. With Easee Equalizer, circuit-level load balancing works alongside OCPP smart charging from 22togo.
Does Charge have a display?
No. Like Home, Charge uses LED indicators only. Configuration is via the Easee Portal.
Sources
These steps are based on public vendor documentation.