Easee · OCPP 1.6J

Not hardware-validated by 22togo Last verified 2026-11-12

Easee Home

Connect an Easee Home 22 kW three-phase charger to 22togo over OCPP 1.6J.

22 kW 3-phase 1 × Type 2 OCPP 1.6J

The Easee Home is configured via the Easee Portal. Enable OCPP in Settings → OCPP, enter the OCPP Server URL (with identity path), Charge Point ID, and OCPP Auth Key (22togo token).

Before you start

  • A 22togo station record with its exact identity (Charge Point ID) and OCPP auth token.
  • The OCPP server URL shown in the 22togo app for that station (including identity path).
  • The charger installed, powered, and connected to the internet (Ethernet, Wi-Fi, or 4G).
  • An Easee account with access to the site in the Easee Portal.

Settings to enter

Use these values when configuring the charger's OCPP backend.

Setting Value Notes
OCPP Server URL wss://<ocpp-host>/<identity> Use the exact URL from the 22togo app. Must include the identity path segment.
Charge Point ID <identity> Must match the 22togo station identity exactly. Easee uses the charger serial by default.
OCPP Auth Key <ocpp_auth_token> Enter the per-station auth token from 22togo in the 'OCPP Auth Key' field.
OCPP Version OCPP 1.6J Select OCPP 1.6J.
Network Ethernet, Wi-Fi, or 4G Configure network first (charger must be online in Easee Portal).

Setup steps

Follow the steps in order. Restart the charger after changing backend settings.

  1. 1

    Ensure charger is online in Easee Portal

    1. Log in to portal.easee.com.
    2. Navigate to your site and charger. 3. Verify the charger shows ‘Online’ (green status). If offline, check network (Ethernet, Wi-Fi, or 4G via the Easee app).

    Easee chargers connect to the Easee cloud first. The portal manages Wi-Fi/4G configuration.

  2. 2

    Configure OCPP settings

    1. In the Easee Portal, select the charger.
    2. Go to Settings → OCPP.
    3. Enable OCPP toggle.
    4. Set OCPP Version to 1.6J.
    5. In OCPP Server URL, enter the full 22togo WebSocket URL including identity path (e.g., wss://ocpp.22togo.com/CHG-001).
    6. In Charge Point ID, enter the exact station identity from 22togo (or leave blank to use serial).
    7. In OCPP Auth Key, enter the OCPP auth token from 22togo. 8. Click Save.

    The ‘OCPP Auth Key’ field is the per-station token from 22togo. The charger serial is used as identity by default; only override if your 22togo identity differs.

  3. 3

    Restart and verify

    1. After saving, the charger will reconnect to the OCPP backend.
    2. In the portal, check Status → OCPP — should show ‘Connected’ with OCPP 1.
      1. In 22togo app, station should show ‘Online’.

    If connection fails, verify server URL (includes identity path), auth key, and network. Check Easee Portal logs for error details.

Charger capabilities

What this model supports with 22togo over OCPP.

  • OCPP 1.6J

  • Portal-based commissioning

  • Ethernet, Wi-Fi, 4G

  • OCPP Auth Key support

  • Smart charging profiles

  • Dynamic load balancing

    Easee's circuit-level load balancing works alongside OCPP.

Frequently asked questions

Does Easee Home support OCPP 1.6J?

Yes. Easee Home supports OCPP 1.6J via the Easee Portal (Settings → OCPP).

Does Easee Home have a display?

No. The Home has LED status indicators only. All configuration is via the Easee Portal or app.

Can Easee Home use 4G?

Yes. Easee Home has a built-in 4G modem (requires Easee SIM or compatible APN).

Sources

These steps are based on public vendor documentation.