Zaptec · OCPP 1.6J
Not hardware-validated by 22togo Last verified 2026-11-12Zaptec Go
Connect a Zaptec Go 22 kW three-phase charger to 22togo over OCPP 1.6J.
The Zaptec Go is configured via the Zaptec Portal. Switch to OCPP 1.6J authentication, then enter the OCPP Server URL (with identity path) and Password (22togo auth token).
Before you start
- A 22togo station record with its exact identity (Charge Point ID) and OCPP auth token.
- The OCPP server URL shown in the 22togo app for that station (including identity path).
- The charger installed, powered, and connected to the internet (Ethernet, Wi-Fi, or 4G).
- A Zaptec account with access to the installation in the Zaptec Portal.
Settings to enter
Use these values when configuring the charger's OCPP backend.
| Setting | Value | Notes |
|---|---|---|
| OCPP Server URL | wss://<ocpp-host>/<identity> |
Use the exact URL from the 22togo app. Must include the identity path segment. |
| Charge Point Identity | <identity> |
Must match the 22togo station identity exactly. Zaptec uses the charger serial by default. |
| Authorization Key | <ocpp_auth_token> |
Enter the per-station auth token from 22togo in the 'Password' field. |
| OCPP Version | OCPP 1.6J |
Select OCPP 1.6J authentication in the portal. |
| Network | Ethernet, Wi-Fi, or 4G |
Configure network connectivity first (charger must be online in Zaptec Portal). |
Setup steps
Follow the steps in order. Restart the charger after changing backend settings.
-
1
Ensure charger is online in Zaptec Portal
- Log in to portal.zaptec.com.
- Navigate to your installation. 3. Verify the charger shows ‘Online’ status (green dot). If offline, check network connectivity (Ethernet, Wi-Fi, or 4G).
Zaptec chargers must be connected to the Zaptec cloud first. The portal manages network configuration.
-
2
Enable OCPP 1.6J authentication
- In the Zaptec Portal, go to Settings → Authentication for the installation.
- Select OCPP 1.6J authentication (instead of Zaptec Authentication). 3. This reveals the OCPP configuration fields.
Only users with Owner or Service permissions can change the authentication method.
-
3
Configure OCPP connection details
- In the OCPP settings, enter the OCPP Server URL — the full 22togo WebSocket URL including identity path (e.g.,
wss://ocpp.22togo.com/CHG-001). - In Password, enter the OCPP auth token from 22togo.
- In URL (optional), you can override the charge point identity if different from the serial number. 3. Click Save.
The ‘Password’ field in Zaptec Portal is the OCPP Authorization Key. The charger serial is used as identity by default; only change the URL field if your 22togo identity differs from the serial.
- In the OCPP settings, enter the OCPP Server URL — the full 22togo WebSocket URL including identity path (e.g.,
-
4
Verify connection
- After saving, the charger will reconnect to the new OCPP backend.
- In the portal, check the charger status — it should show the OCPP connection as active. 3. In the 22togo app, the station should show ‘Online’ with negotiated protocol OCPP 1.6.
If connection fails, verify the server URL includes the identity path, the password (auth token) is correct, and the charger has internet. Check Zaptec Portal logs for details.
Charger capabilities
What this model supports with 22togo over OCPP.
-
OCPP 1.6J
-
Portal-based commissioning
-
Ethernet, Wi-Fi, 4G
-
Authorization Key support
-
Smart charging profiles
-
Circuit-level load balancing
Zaptec's circuit-level load balancing works alongside OCPP.
Frequently asked questions
Does Zaptec Go support OCPP 1.6J?
Yes. The Go supports OCPP 1.6J via the Zaptec Portal. Select 'OCPP 1.6J authentication' in Settings → Authentication.
Does Zaptec Go have a display?
No. The Go has LED status indicators only. All configuration is via the Zaptec Portal or app.
Can I use Zaptec Go with 22togo's smart charging?
Yes. Zaptec Go supports OCPP smart charging profiles (Default, TxProfile, MaxProfile) from 22togo.
Sources
These steps are based on public vendor documentation.