Fronius · OCPP 1.6J

Not hardware-validated by 22togo Last verified 2026-11-12

Fronius Wattpilot Home 22

Connect a Fronius Wattpilot Home 22 kW three-phase charger to 22togo over OCPP 1.6J.

22 kW 3-phase 1 × Type 2 OCPP 1.6J

The Fronius Wattpilot Home 22 is configured via Solar.web or the app. Enable OCPP in Settings → OCPP, enter the OCPP Server URL (with identity path), Charge Point ID, and OCPP Password (22togo token).

Before you start

  • A 22togo station record with its exact identity (Charge Point ID) and OCPP auth token.
  • The OCPP server URL shown in the 22togo app for that station (including identity path).
  • The charger installed, powered, and connected to the internet (Wi-Fi or Ethernet).
  • A Fronius Solar.web account with access to the Wattpilot.

Settings to enter

Use these values when configuring the charger's OCPP backend.

Setting Value Notes
OCPP Server URL wss://<ocpp-host>/<identity> Use the exact URL from the 22togo app. Must include the identity path segment.
Charge Point ID <identity> Must match the 22togo station identity exactly.
OCPP Password <ocpp_auth_token> Enter the per-station auth token from 22togo. Fronius calls this 'OCPP Password'.
OCPP Version OCPP 1.6J Select OCPP 1.6J.
Network Wi-Fi or Ethernet Configure Wi-Fi (via app) or Ethernet before enabling OCPP.

Setup steps

Follow the steps in order. Restart the charger after changing backend settings.

  1. 1

    Ensure Wattpilot is online in Solar.web

    1. Log in to solarweb.com.
    2. Navigate to your Wattpilot device. 3. Verify it shows ‘Online’ status. If offline, check network (Wi-Fi via app or Ethernet).

    Fronius Wattpilot connects to Solar.web first. The portal manages Wi-Fi configuration via the app.

  2. 2

    Configure OCPP in Solar.web

    1. In Solar.web, select your Wattpilot.
    2. Go to Settings → OCPP.
    3. Enable OCPP.
    4. Set OCPP Version to OCPP 1.6J.
    5. In OCPP Server URL, enter the full 22togo WebSocket URL including identity path (e.g., wss://ocpp.22togo.com/CHG-001).
    6. In Charge Point ID, enter the exact station identity from 22togo.
    7. In OCPP Password, enter the OCPP auth token from 22togo. 8. Click Save.

    Fronius uses ‘OCPP Password’ for the authorization token. The charger will restart after saving.

  3. 3

    Alternative: Configure via Wattpilot app

    1. Open the Fronius Wattpilot app.
    2. Select your charger.
    3. Go to Settings → OCPP.
    4. Enter the same values: Server URL, Charge Point ID, Password, Version 1.6J. 5. Save.

    The app provides the same OCPP settings as Solar.web. Useful if you prefer mobile configuration.

  4. 4

    Verify connection

    1. After saving, the Wattpilot will restart and reconnect.
    2. In Solar.web, check Status → OCPP — should show ‘Connected’ with OCPP 1.
      1. In 22togo app, station should show ‘Online’.

    If connection fails, verify server URL (includes identity path), Charge Point ID, and OCPP Password. Check Solar.web logs for errors.

Charger capabilities

What this model supports with 22togo over OCPP.

  • OCPP 1.6J

  • Portal & app commissioning

  • Wi-Fi & Ethernet

  • OCPP Password support

  • Smart charging profiles

  • PV surplus charging (with Fronius inverter)

    Wattpilot's PV surplus (with Fronius inverter) works alongside OCPP smart charging.

Frequently asked questions

What's the difference between Wattpilot Home 11 and 22?

The Home 11 is 11 kW (16A three-phase), the Home 22 is 22 kW (32A three-phase). OCPP setup is identical.

Can Wattpilot Home 22 do PV surplus?

Yes. With a Fronius inverter, PV surplus charging works alongside OCPP smart charging from 22togo.

Does Wattpilot support load balancing?

Yes. With a Fronius Smart Meter, dynamic load balancing works alongside OCPP.

Sources

These steps are based on public vendor documentation.